HARDWARE UPDATE

Dual Pixel CMOS AF Technology

This hardware upgrade provides an autofocus mode to help ensure sharp focus and smooth focus transitions. It provides a new Continuous AF (Autofocus) function for all autofocus lenses, using Dual Pixel CMOS AF technology. A new AF Lock setting also lets you change the image framing while holding the desired focus. This feature is ideal for users who regularly shoot with smaller crews, who shoot moving subjects, or who want smoother, more natural-looking autofocus.

Dual Pixel CMOS AF technology features a CMOS sensor that consists of an array of pixels that each feature two separate photodiodes. By continuously comparing their outputs during AF mode, phase-difference autofocus helps ensure non-blurred images and smooth focus transitions even when the talent and/or camera are moving. The new feature places a high priority on maintaining sharp focus while providing a natural, smooth autofocus movement with select Canon EF lenses including newer-generation STM lenses which offer even smoother and quieter operation.

FIRMWARE UPDATES

Continuous Recording

The continuous, nonstop recording function allows you to create In and Out points in the footage every time the START/STOP button is pressed. At this time, the continuous recording function is compatible with Grass Valley's EDIUS Pro 7 software.

320 to 80,000 ISO Range

With an extended ISO range from 320 to 80,000, the EOS C100 is even more sensitive to light than it was before. This lets you shoot usable footage during low-light and night shoots, even when using available or ambient lighting as your main light source. Being able to operate under lower light levels means you can work quickly with smaller crews and resources, ideal for low-budget and independent filmmakers.

Menu Navigation via Camera Buttons

Internal camera menus are now controllable from buttons on the camera body. While previously a removable joystick was the only way to control the internal menus, now buttons on the rear of the camera under the built-in monitor can be used. This lets you access the menus when the side grip is removed.

Viewfinder Magnification Location Shift

Manually move the center of the camera's magnification viewing area to one of 25 different locations throughout the image frame using the joystick. Now camera operators can easily check focus even on subjects that are located away from the center of the image frame.

Record Button Lock

The Key Lock setting now makes it possible to lock all operations, including the record button. This helps to prevent accidental operation during a critical shoot by the operator inadvertently pressing a wrong button.

Support for New Remote Controller

Scheduled to be available around June 2014, the new versatile RC-V100 Remote Controller will provide full access to all important user functions such as start-stop, shutter/gain adjustments, zoom/focus/iris control, custom picture values, while balance, black gamma, and more. The remote can also be used to adjust various menu settings. A SETUP mode lets you customize a number of key rotary controls, as well as user procedures and operating models. The RC-V100 is powered from the connected camcorder via a 15' (5m) cable. A USB port enables the unit's firmware to be updated to support future remote-control functions.

Enhanced Peripheral Lens Correction Support

The firmware update adds Peripheral Illumination Correction Data for several Canon EF and Canon Cinema lenses. By maintaining even illumination from corner to corner of each image frame, Peripheral Lens Correction helps eliminate vignetting and other unevenness of light across the sensor, using specific lens characteristics such as focal length, aperture, and distance settings. Visit Canon's website for a complete listing of supported lenses.

ALL FEATURES

Super 35mm 8.3MP CMOS Sensor

The C100's Super 35mm-sized sensor provides an angle-of-view and depth of field that equivalent to that of traditional Super 35mm film. With a native resolution of 8.3MP and a wider pixel pitch than conventional professional camcorders, the C100's sensor offers enhanced sensitivity and reduced noise in low light environments.

DIGIC DV III Image Processor

Designed and built by Canon for the highest HD RGB processing, the DIGIC DV III Image Processor uses proprietary circuits and architecture to deliver the highest image quality at the highest speeds, with low power consumption and minimal heat output. It processes the RGB representations that originate in the single CMOS sensor of the camera into three channels (Red, Blue, and Green) to maintain the rich resolution and clean color fidelity formerly possible only in three-chip sensor designs.

Low Light Sensitivity

Working together, the Super 35mm sensor and DIGIC DV III Image Processor achieve a high signal-to-noise ratio that enables recordings with great detail and dynamic range even in minimal light.

Canon Log Gamma and Wide DR Gamma

Canon Log records an image with subdued contrast and sharpness, which preserves a high dynamic range and presupposes color grading in post production. Canon Log Gamma emphasizes rich gradients from mid-range to highlights, resulting in 12-stops of dynamic range. At ISO 850 and above, Canon Log Gamma enables 5.3 stops of latitude above optimal exposure (and 6.7 stops below), broadening the available dynamic range in color grading.

Wide DR Gamma yields wide dynamic range by suppressing brightness while maintaining gradations, but is designed to produce finished-looking images without requiring any color grading in post-production.

EF Lens Mount with EF Contacts

The C100 is fully compatible with Canon's renowned EF mount lenses. Even specialty lenses, such as Canon's 24mm f/3.5L II tilt shift lens or the 8-15mm f/4L Ultra-Wide Zoom fisheye lens, are available on the C100. When shooting with EF lenses, C100 features peripheral illumination correction, which automatically compensates for light fall-off in the corners of the image.

Multiple Recording Modes and Frame Rates

The EOS C100 supports AVCHD bit rates up to 24Mbps (LPCM) at a maximum resolution of 1920x1080. Frame rates of 60i, 50i, 24p, 25p, PF30, and PF24 are all available to meet the needs of your production workflow. In addition, the 60i frame rate offers reduced rolling shutter artifacts. The EOS C100 supports relay recording of long takes between dual SD cards or can write video to both cards for redundancy in the event of SD card failure. Pre REC mode buffers approximately three seconds before the tally light activates.

Uncompress HDMI Out with Timecode

The C100 outputs an uncompressed signal via HDMI. This signal superimposes timecode and the 2:3 pulldown marker, which means an external recorder and converter can process the HDMI output as an SDI signal. External recorders provide an instant back-up and help to streamline post-production workflows.

Compact and Ergonomic Design

The EOS C100 is designed with the solo shooter in mind. It is 85% smaller than the Canon C300, 14.5 ounces (410 grams) lighter, and it is based on a mobile core design that allows additional accessories to be attached depending on the situation. Strip the EOS C100 down for a "run-and-gun" style, or complement the camera with the full range of camera-mounted accessories. With a compact body, you can even shoot dual-camera 3D without an over-sized and cumbersome rig. Its light weight reduces user fatigue and allows even elaborate rigging systems to remain mobile enough for a single operator. The removable accessory hand grip rotates 360 degrees for comfortable shooting positions, while customizable hardware buttons allow the EOS C100 to fit your own personal shooting preferences.

Removable Top Handle with XLR Inputs and Stereo Microphone

The C100 includes a top mounted handle unit, which features two XLR connectors and a microphone shock mount. XLR connections offer a high quality audio input for professional grade microphones and facilitate 2 channel 48kHz linear PCM (24Mbps) audio recordings.

High Resolution EVF and Integrated LCD Display

Accurately check focus, composition, and exposure with the 1.56 million dot-equivalent 0.24" electronic viewfinder with 100% coverage. The built-in 3.5" 920k dot LCD tilts 100 degrees for flexibility when composing tough perspective shots and rotates 180 degrees to protect the screen when not in use. Use the LCD display to review footage or to view the EOS C100's waveform monitor.

AVCHD File Based Recording to SD Cards

The EOS C100 records video to SDHC/SDXC cards using AVCHD, a high-efficiency codec that has quickly become a standard in both the professional and consumer video markets. Maximum bit-rate is 24Mbps. Video files greater than 2GB are split into multiple files while recording, which are automatically joined together upon import using Canon Data Import. AVCHD video is widely supported across NLE systems and is the standard codec for Blu-Ray.

Full Manual Control and Focusing Aids

The EOS C100 offers complete manual control of each aspect of the recording process. Create and recall custom picture settings, camera functions, and display options. The camera also features several powerful and intuitive focusing aids in both the EVF and LCD monitor that make it easy to confirm critical focus distance; Peaking Modes and Magnify Focus Modes are available while in standby or while recording. Additionally, the LCD features Edge Monitor Display; green waveforms display the overall focus of the scene and red waveforms provide focus feedback of the three focus check boxes visible on the LCD monitor.

One Shot AF and Push Auto Iris

One-Shot AF executes focus adjustments with a dedicated button, and the Push Auto Iris button automatically adjusts the aperture of the lens to quickly and easily maintain proper exposure. Both of these functions can be accessed even when operating in manual mode.

Built-in ND Filters

In excessively bright environments neutral density filters are often required to avoid over exposure, without compromising desirable shutter and aperture settings. The C100 features built-in ND filters in three densities, which make for four ND configurations (OFF, 2 stops, 4 stops, 6 stops). The built-in ND filters are deployed via a manual dial.

Remote Terminal

Remotely control the EOS C100 via its LANC-compatible remote terminal. Remote operation allows for single-person operation even in creative rigging situations.

Additional Features

• Waveform monitor; standard and RGB modes
• Exposure/Focus aids: Peaking, Zebra, Magnify, Edge Monitor Focus Assist, Black and White Mode
• Drop Frame (DF) or Non-Drop Frame (NDF) Timecode
• Timecode modes: Regen, Record Run, Free Run
• Nice Customized Picture Profiles available in camera and up to 20 can be saved to an SD card
• Custom picture profiles can be adjusted using the following settings: Gamma, Black, Black Gamma, Low Key Saturation, Knee, Sharpness, Noise Balance, Color Correction, Setup Level
• 15 assignable function buttons
• SMPTE, EBU, or ARIB standard color bars can be selected